Skip to main content

Pre-Engineered Steel Building Sizing & Applications Guide: Metal Shop Buildings to Hangars

By: Kevin Gray
Aug 10, 2025
Clear Span Buildings

Size a pre-engineered steel building from the use, not the square footage. The widest thing inside sets the clear span, up to 250 feet with no interior columns. The tallest door or machine sets the eave height, 10 to 30+ feet. Bays of 20 to 25 feet set the length.

That's true for metal shop buildings and for every other red iron (welded I-beam) building we sell. Each application has one dimension that drives it, and a roof style that tends to fit. Every building is still engineered to its jobsite address and intended use, so treat any size here as a starting point for a quote, not a final spec.

Which Three Numbers Size Every Red Iron Building?

Every red iron building comes down to three dimensions, written width x length x eave height. A 40x60x16 is 40 feet wide, 60 feet long, and 16 feet tall at the eave.

  1. Width (clear span). The distance between sidewalls. On a clear span frame, it's also the open floor with no interior columns. We engineer clear spans up to 250 feet.
  2. Eave height. The height of the sidewall where it meets the roof. Ours run from 10 to 30+ feet. Eave height decides what fits through your doors and what can operate inside.
  3. Length, in bays. Primary frames typically sit 20 to 25 feet apart. Each space between frames is a bay, and the length of the building is a run of bays.

Two more choices shape the building without changing its footprint: roof pitch (2:12 or 4:12 standard, others on request) and roof style (gable or single-slope standard, monitor or offset ridge for specialty uses).

Get those five right and the rest of the building follows. Get width or eave height wrong and no option list will fix it.

What Size Pre-Engineered Steel Building Fits Each Application?

The sizes listed on our shop page are standard building options, and each building is still engineered for your site before it ships.

Application The dimension that drives it Sizes on our shop page Roof style that tends to fit More detail
Metal shop buildings Lift or vehicle bay width, door height 20x25x11, 20x40x10, 40x60x12 Gable Automotive and repair shops
Equipment and hay barns Widest implement, tallest machine through the door 40x45x13 barn, 40x60x14 barn, 40x60x18 agricultural Gable or monitor Agricultural buildings
Aircraft hangars Wingspan and tail height, hangar door opening Engineered to the aircraft Gable Aviation hangars
Commercial and retail Floor plan, storefront, future build-out 128x75x15 commercial, 50x100x20 Gable, single-slope, or offset ridge Commercial buildings
Industrial and manufacturing Process line length, equipment height, dock doors 30x60x16, 50x200x16 industrial Gable Industrial buildings
Warehouse and storage Racking height, truck access, aisle layout 15x84x19 warehouse, 40x60x16 and 60x140x16 storage Gable or single-slope Storage buildings
Government and municipal Program needs: vehicle bays, offices, public space 50x48x16 government Gable Government and municipal
Churches Sanctuary seating, fellowship hall, phasing Engineered to the plan Gable Church buildings
Recreation and arenas Court or arena floor plus spectator space Engineered to the use Gable Recreational buildings
Barndominiums Living area plus shop or garage bays 40x60x14, 40x62x24, 45x80x12 Gable Red iron barndominiums

A few patterns stand out. Agricultural and hangar buildings are sized by the biggest machine, so door openings drive them as much as floor area. Warehouses and industrial buildings are sized by height and length. Shops and storage buildings sit in the middle, where a 40-foot-wide frame covers a lot of jobs.

How Should a Red Iron Metal Shop Building Be Sized?

Start with the work that happens at the door. A shop that pulls in trucks, tractors, or equipment needs an opening that clears the tallest load, and the door header has to sit below the eave. That makes eave height the first number, then width.

For a working shop:

  • Count the bays you'll use at once. A lift bay, a wash bay, and a parts area each need their own floor.
  • Plan the tallest door first. It sets the minimum eave height.
  • Pick a width that leaves aisle space beside the widest vehicle with its doors open.
  • Add length in whole bays so doors and openings land between frames.

Mechanics, fleet operators, and fabrication shops usually outgrow a small footprint fast. If there's any chance you'll add a bay later, tell us at the quote stage.

How Should Farm Buildings and Hangars Be Sized?

Wide clear spans and tall eaves make red iron a common choice for farm buildings and hangars, and both are sized by a machine, not a headcount.

Farm and equipment buildings. Size by implement. Measure the widest piece of equipment you'll store with any folding wings or booms in transport position, and the tallest with its cab, exhaust, or loader. Those two numbers set the door, and the door sets the eave height. Hay storage and livestock barns add their own needs: stacking height for hay, and moisture control for animals. We don't supply ventilation systems, so plan airflow with your contractor.

Hangars. Size by aircraft. The wingspan sets the minimum door width and the clear span, and the tail height sets the door height and the eave. Leave room to tow the aircraft in and walk around it, and think about the next aircraft, not just the current one. A monitor or offset ridge roof can work on aviation buildings, and the 250-foot clear span covers larger hangars without a column in the floor.

In both cases, give us the machine's dimensions and the door you want, and engineering works out the frame.

How Wide Can a Red Iron Building Go Without Columns?

Up to 250 feet. That's the number that separates red iron from lighter framing. A 250-foot clear span means no interior columns across the full width, which is what hangars, riding arenas, and warehouses with forklift traffic need.

Width costs more steel per foot, so the right width is the narrowest one that does the job. Some uses need every foot of span:

  • Hangars: a column in the wrong place means an aircraft that doesn't fit.
  • Arenas and recreation buildings: columns break up the playing or riding floor.
  • Warehouses: columns cut into racking runs and truck turning room.

Others don't. A shop or a storage building rarely needs more than the width of the widest thing parked inside plus working room. If you're between two widths, compare standard red iron clear span building widths and pick the narrower one that fits.

How Tall Should the Eaves Be for Your Use?

Eave heights run from 10 to 30+ feet. The right one depends on what moves through the doors and what operates inside:

Use What sets the eave height
Storage and small shops Standard overhead door height plus header
Equipment barns Tallest machine with cab or exhaust stack
Hangars Tail height plus hangar door hardware
Warehouses Top of racking plus fire and lighting clearance
Industrial Process equipment, mezzanines, or overhead handling

Taller is not automatically better. Every foot of eave adds wall panel, girts, and wind area, so it shows up in the engineering and the price. Measure the real height you need, add a margin for the door header and any overhead equipment, and stop there.

How Does Bay Spacing Set the Length?

Bays typically run 20 to 25 feet between primary frames. A 60-foot building works out to three 20-foot bays. A 100-foot building can be four 25-foot bays or five 20-foot bays.

Why it matters for sizing:

  • Sidewall doors sit between frames. A large sidewall door needs a bay wide enough to hold it, which is one reason door locations belong in the first conversation.
  • Expansion adds bays. If the building might grow, length is the easy direction to grow it.
  • Wider bays mean fewer frames. That can open up the floor along the length of the building, at the cost of heavier secondary framing.

Give us a length and your door schedule, and the bay layout gets engineered around both.

Which Roof Style Fits Which Use?

Gable and single-slope roofs are standard. Monitor and offset ridge roofs are specialty styles for agricultural, aviation, and retail buildings.

  • Gable: the default for shops, barns, hangars, and storage. Water sheds both directions.
  • Single-slope: common on commercial and retail buildings where the high side faces the street or where roof drainage needs to go one way.
  • Monitor: a raised center section, often used on barns.
  • Offset ridge: a ridge that isn't centered, used where one side needs more height than the other.

Pitch is 2:12 or 4:12 standard, with other pitches on request. Choose the roof style for your red iron building by use and drainage first, then the pitch.

Pre-Engineered or Custom: Which Do You Need?

Both, in a sense. A pre engineered metal building uses a standardized system of frames, purlins, girts, and panels. Custom metal buildings set their own geometry inside that system. At ProSpan, every building is engineered to its jobsite address and intended use, so even a size from our shop page is engineered for your site before it ships.

The practical difference is where you start:

  • Start from a listed size if one of the buildings on our shop page is close to what you need. It gives your rep a concrete starting point.
  • Start from your use if the building has a large door, an aircraft, a process line, or a floor plan that drives the dimensions.

Either way, the design-to-delivery timeline runs the same: an engineered quote in 3 to 7 days, then stamped drawings, then fabrication and delivery, with lead times of 8 to 16 weeks depending on size and design complexity.

How Do Wind and Snow Loads Change the Size You Can Build?

Every ProSpan building is engineered for the wind and snow loads at its address. Design loads in the US generally trace back to the ASCE 7 standard for minimum design loads, as adopted by state and local building codes.

Loads don't usually change the footprint you can have. They change the frame that holds it up. A wide, tall building on the coast needs heavier framing than the same building inland, and a building in heavy snow country needs a roof engineered for that load.

The rep pulls information from state requirements for wind speeds. It's the responsibility of you or your architect to verify the local wind speed design requirements. That's why we don't quote one flat wind rating for hurricane resistant red iron buildings.

What Should You Measure Before Asking for a Quote?

Most sizing mistakes come from guessing. Before you call, write down:

  • The widest thing inside (vehicle, implement, aircraft, racking run) plus working room on each side
  • The tallest thing through the door, with any cab, stack, or tail
  • Every large door, with width, height, and which wall it goes on
  • How many bays or work areas you'll use at once
  • The jobsite address, so engineering can start
  • Insulation and finish plans: fiberglass blanket from R-10 to R-25 (banded systems for R-30 and up), and galvalume or one of 20+ colors in 26-gauge

With that list, a quote can go straight to engineering. Each red iron quote takes 3 to 7 days of engineering time.

Frequently Asked Questions

What is the widest red iron building ProSpan can engineer?

We engineer clear spans up to 250 feet, meaning no interior columns across the full width of the building.

What eave heights are available on a red iron building?

Eave heights run from 10 to 30+ feet. The tallest door or piece of equipment usually sets the minimum.

How far apart are the frames in a red iron building?

Bays typically run 20 to 25 feet between primary frames. The building's length is a run of those bays.

Is red iron the right frame for a large shop or warehouse?

Yes. Red iron is welded I-beam framing, and it's what makes wide clear spans and tall eaves possible. Tube steel is a different framing category that we don't sell.

Are the sizes on your shop page fixed?

No. Every building is engineered to its jobsite address and intended use before it ships, so a listed size is a starting point. Tell us the use and the changes you need, and we'll quote it.

Is installation included with a red iron building?

No. We sell the engineered building package, and delivery and installation are not included in the price. For local jobs in Florida and Georgia, you can ask for a separate erection number. Elsewhere, your contractor erects the building from our stamped drawings.

Send Us the Use and the Numbers

The fastest quotes start with three numbers and a use. Tell us what the building is for, its rough width, length, and eave height, where the big doors go, and the jobsite address. Comparing framing types first? Weigh red iron vs tube steel before you settle on a size. Pricing a common size? Check what a 40x60 red iron building costs before you call.

Every quote includes the engineered package: primary and secondary framing, roof and wall panels, trim, fasteners, bracing, and permit-ready, engineer-stamped structural and foundation plans. See all red iron building types or request a quote. You can also call (386) 247-0255 (toll-free (855) 493-0332), Monday to Friday, 9:00am to 5:00pm.